The professional user’s best option for general
applications up to 300A
Origo Mig C3000i and L3000i are professional user’s ideal
system for general applications up to 300A. Exceptional value
with excellent weld quality and ease of use.
Origo Mig C3000i and L3000i are CC/CV machine for operating
both MIG and MMA welding
The power sources are based on inverter IGBT technology that
provides reliable equipment with outstanding welding
characteristics.
Feeding system for all applications
The power sources are optimised to operate together with the
wire feed system Origo™ Feed L3004 . The compact version
has the feeder build in the power source. With separte version
connection cables up to 15 m provides a wide working radius
and together with all standard accessories as wheel kit, lifting
eye it’s provide full flexibility.
The TrueArcVoltage System
In combination with an ESAB PSF gun, guarantees that you
weld with the correct arc voltage independent of any voltage
drop in the welding cables. This means that you will get the
same arc voltage and weld result either you have a set-up with
short connection cable and 3m gun or a set-up with 15 meter
working radius.
Basic Mig settings
Origo Mig C3000i and L3000i is equipped with an easy to set
Man Machine Communication panel with the basic function for
MIG welding. Together with the inverter technology is the ideal
solution to always get the best welding result.
|
|
QSet™– Stable short arc in no time
The MA23A panel version has an unique setting of welding
parameter in short arc.
Simply set the wire feed speed and the QSet™ will
automatically select the correct welding parameters for the
required wire/gas combination. QSet™ does this for all valid
gas and wire combinations, CO2 and MAG Brazing alike and
without any need of synergic lines.
QSet™ is a new quick way to find optimised welding
parameters for the best quality weld. Spatter is reduced to a
minimum.
It is simple and straightforward to set a new working point with
QSet™. Only change wire feed speed to match the required
welding power and then QSet™ will select all other parameters
for an optimised welding result in the whole short arc area.
All this with only one knob control. |
